How to Fix 5 Beep Error in Dell Inspiron?admin
Dell Beep Code 5 means it gives 5 beep sound, which indicates Time Clock (RTC) power fail or CMOS battery failure problem occurs in your system. Meanwhile, your system is booted with 5 continuous beeps, the sound of which decreases in intensity when the welcome screen appears. This is really an annoying situation. Well, many users have a complaint to get a Beep Code 5 in their Dell system while starting & working inside the computer. There could be some issues with the CMOS battery which needs to be replaced. However, here the mentioned some very simple steps which will tell you How to Fix 5 Beep Error in Dell Inspiron? So you just only need to follow these steps to fix the issue.
Steps to Fix 5 Beep Error in Dell Inspiron When Start-Up:
Step 1:- Remove New Hardware
You should try to remove that hardware, in case if any new hardware has been recently added to the computer and ensure that it’s not the cause of your issue. If your computer works fine after removing the new hardware that means there may involve various things. Either the new hardware is not compatible with your computer, or a system setting wants to be changed, or the new hardware is defective. Then solve this issue, which might be helpful to resolve the issue.
Step 2:- Verify all Cables
You should try to verify that all the cables are securely connected to the computer and that there are no loose cables by firmly pressing in each cable.
- Check that all disk drives should have a data cable and power cable connected to them.
- Check that your power supply should have at least one cable going to the motherboard. Many motherboards may also have additional cables connected to them to supply power to the fans.
Step 3:- Check all Fans
Ensure that all fans are running on your Dell computer properly. In case your fan has failed, then your computer could be overheating or detecting the fan failed, causing the computer not to boot.
Step 4:- Disconnect all Expansion Cards
If the above the above steps still have not resolved the issue, then you should try to disconnect the riser board and each of the expansion cards. If this fixes the problem or allows the computer to POST, connect one card at a time until you determine which card is causing the problem.
Step 5:- Remove Any Disks or USB Devices
Try to USB removes any disks, CDs, or DVDs that are on the computer. If any USB devices like iPods, drives, and phones, are connected, then disconnect all of them as well.
Reboot the computer and see if anything changes.
Step 6:- Disconnect External Devices
You should try to remove everything from the back of the computer, except the power cable. Turn on the computer and see if it beeps normally. If the computer has never beeped, keep the monitor or display connected to see if any change occurs.
I hope your Dell problem is resolved.
Need Help! Contact Dell Customer Care Number 1800-204-4427:-
You can dial Dell Inspiron Support Number 1800-204-4427 to get online help instant if you have any confusion or problem in the above steps. The number is toll-free and available 24×7 and 365 days throughout the year. By connecting a team of our talented and experienced Dell customer support experts, you will get you the best possible troubleshooting instructions to fix this error or other kinds of Dell computer issues. Hence, connect with proficient technicians now and avail prompts help & support for Dell queries.